Thursday, November 30, 2017

MPC Lunar Patrol: Part 12 - Let The Painting Begin !

The first task in getting the LP finished is painting the interiors of the booster pods and glider fuselage tubes.  I went with some matte black acrylic for this part.

Back in my 'old fleet' days, I wouldn't have bothered with this detail.  Back then, it was all about getting the bird out to the launch pad ASAP, without spending a great deal of time with the craftsmanship aspect of the build.
Nowadays, in my curmudgeonly, grumpy, perfectionistic old-fart BAR years, these details do not go overlooked!

Next is a couple of brushed-on coats of gloss black enamel to the glider nose cones.


 I'm not worried at all about weight here, since I am going to have to add more to the nose cone bases anyway for glide trimming.

Next up- the good stuff - masking and shooting the base color coats.

Cheers.

Wednesday, November 29, 2017

MPC Lunar Patrol, Part 11

Finally..(cough, cough)
   .... all of that filling, priming, and (hack, hack) sanding is done on this bird !!

Ready to start on painting and detailing. 
I might actually have this model finished by the end of December. 
I am definitely in great anticipation of getting this model rocket in the air.
Stay tuned....

Monday, November 27, 2017

Launch Date: November 25, 2017

This Thanksgiving weekend was marked by a spell of wonderfully warm and calm Colorado weather, so what better time to get out and launch a few model rockets? 
Friday night, my 7 year old grand son put the finishing touches on his Generic E2X model, and we planned to launch the next morning.  I was also anxious to get out and launch the newly- built Griffin-2 booster and Firefly parasite glider.
Saturday morning, we stopped by the hobby store to pick up a couple needed packages of engines, then headed for Dove Valley Park.  Arriving around 11a.m. we found the field deserted except for a large flock of geese.  Temperature was  55 degrees and wind hovered around 5mph.

The first bird off the pad was the Hornet on an A3-4T engine.  Another perfect flight, with the newly
installed internal engine retainer performing wonderfully.







Next up was the maiden flight of the grandsons' Generic E2X.  The model boosted nicely on an A8-3 engine, deployed its parachute and landed fairly close to the launch pad. The young lad was quite elated, and gleefully set out on recovery.


After a short session of hand launch glide trimming of the Estes Firefly, I had it on the pad attached to the Griffin-2 boost vehicle.  Flying on a B4-2 engine, the tandem boosted nicely, albeit in a somewhat wide spiraling trajectory, but reaching a respectable altitude.  At ejection, the Firefly separated and seconds later the Griffin's parachute popped open. 
The Firefly immediately settled into an interesting glide pattern, staying perfectly nose-into-the-wind during its entire descent. There was absolutely no turning, stalling, or diving whatsoever. The wind actually pushed it slowly and consistently downrange, so that it appeared that the glider was flying backward.  I got the impression of watching the flight of a hovercraft rather than a glider!
I watched the bird as it appeared to fly over the nearby street and into a parking lot area on the other side, but lost sight of it before it landed.  My grandson and I set out on recovery.  Thinking that this would be a tricky recovery, we walked toward where I had last seen the glider.
"Grandpa, there it is!!", exclaimed the keen-eyed young man.  To my surprise, there was indeed a red object lying in the grass within the borders of the flying field.  The model had made a soft landing on the turf still pointed into the direction of the wind.


Looking later at the cel phone launch video of the flight, 59 seconds had elapsed from liftoff until my comment that I had lost sight of it.  The glider was probably still aloft for another 5 to 10 seconds after that.  60+ seconds is not a bad flight duration for a delta-wing parasite glider on B impulse.












On the way back to the pad area, I happened to find this on the ground...


Not sure if it's a rocket fin or the tail rudder of a small model airplane.
The Griffin-2 booster rocket was successfully recovered as well, thanks to the efforts of the enthusiastic grand-kiddo.


Following that, we put the Generic E2X up for its second flight, again on
an A8-3.  The flight went just as well as the first with the bird landing within 50 feet of the launch pad.
I had brought along the Estes Lynx and the Mini-Maggot glider, but chickened out on flying either one because of the steady 5 mph wind.
Instead, I stuck another A3 in the Hornet and sent it aloft for its 37th flight. Another perfect launch and recovery.
It was really great having my grandson along for this flight session.  Not only was he the 'recovery crew', but he served as Launch Control Officer as well, counting down and pushing the button for all five of today's flights.  He even remembered to announce control system continuity, check for low-flying aircraft, and pull the safety key after each launch.  A splendid new rocketeer in the making!
 

Wednesday, November 8, 2017

Back In The Day, Part 8: More Stickers!

A couple of weeks ago on The Model Rocket Building Blog, Chris Michielssen wrote a post containing some pictures of old model rocket stickers that the manufacturers used to send with orders.
I also have a number of these, except most of them are stuck to my old range boxes and are rather battle scarred and weather-worn. 
Here are some pix of my range box which I am using now. 

 
During the 30+ years that I was away from rocketry, this served as the around-the-house tool box.  Of course, now that I am a BAR, it has returned to being a range box.  Most of the stickers on it were put there in 1974-1976. All are from either Estes or AVI.  Also on top of the box is a NAR sticker, a well-faded Estes Aerospace club sticker, a flag, and a couple of random Space Shuttle stickers..


Another tool box I used back in the day features more EAC stickers. For many years after rocketry, this box held my electronics tool kit, and is now my fishing tackle box.


Also, I have this notebook with more stickers in the front cover pouch.  These well-preserved copies were never used and are still attached to their backing paper.  


Thursday, November 2, 2017

Internal Engine Hook For The Hornet

Last week I posted the woeful story about the messed-up engine tube in the ol' Hornet.
Here's the re-build I came up with: a new engine tube featuring an internal engine retaining hook.
I ran across this neat little technique back sometime in the mid 1970s.  I believe it was published as a contest building tip in an issue of 'Model Rocketeer' or 'American Space Modeling'.
Sadly, I no longer have my old issues of those publications, but if there are any of you out there who might be able to cite the reference, I invite you to post a reply. For this build, I will be relying solely on memory of something I did 35+ years ago....
I recall using this engine retention method in all of my minimum-diameter contest birds and glider pods back in the day, and never once suffered a DQ due to engine ejection.  Very reliable system that beats friction-taping hands down.
The heart of this system consists of a length of .020 music wire that is formed and mounted inside the engine tube.  This size wire is thin enough that it will fit inside the tube alongside the engine casing.

To mount the wire, a slot is cut on the outside of the engine block (here a section of 13mm engine casing).  This provides clearance for the wire between the block and the inner body tube wall.
The fore end of the wire is bent to form over the top of the engine block.
The whole assembly is then glued into place inside the engine tube.



Once the glue is dry, an engine casing can be inserted to mark for the bend at the aft end of the wire.
Because the wire is designed to hook over the engine at its strongest point right next to the bend, there are no real worries about using such a thin diameter wire. Music wire is tough stuff.
The excess wire is then cut off, and, voila.... a nice little engine hook!
When prepping a model for flight with this system, a small pair of needle nose pliers or tweezers are required to grab the end of the hook and secure it over the end of the engine casing.


The only aspect of this system I haven't tested is its endurance.  The contest models I used it in back in the day were never flown more that half a dozen times.
Since I still have 65 flights left to go on the Hornet to reach that magic 100 mark, this bird will be a good test platform for the technique.
If the system proves reliable over time, I may  start incorporating it into more of my future clone and custom designed birds.  Music wire is way less expensive than manufactured engine hooks.
Stay tuned....